Less than most people expect. Each station needs roughly 10×10 ft of level floor, two dedicated 120V/20A circuits to run the heat and flash units, and a dock or freight elevator so the road cases can come in. The presses, ink, blanks, tables and printers all come with us.
Before load-in, confirm these
- Space: the 10×10 footprint, plus a spot for the line that keeps it out of the aisle and away from exits.
- Circuits: two per station, not shared. At the Pennsylvania Convention Center the electrical order goes through the venue in advance. In a Center City hotel ballroom, ask whether catering is on the same circuit.
- A way in: dock, service door or freight elevator, plus the load-in time in writing. The Convention Center schedules move-in by marshalling, with a set dock time and a drayage slot.
- Weather cover outdoors: a tent we can weight on pavement. July in Philadelphia is humid, and wind off the Schuylkill picks up around the spring and fall race weekends.
- One name: the person who can reset a breaker or open the power panel on the day.
Unsure about your space? Send us the venue name and we'll work through it with you. Start with a quote request.
Since the freight lands in Philadelphia before the crew does, give us the delivery address and the receiving hours along with the floor plan. Each building has its own rules on labor, power and move-in. We work inside them, so pass along the exhibitor manual or the venue packet as soon as you have it.